Previous 1 2 3 4 5 6 7 8 9 10 Next
THE REGULATING TOOLS BELOW SHOULD BE USED WITH COMBINATION HANDLE
(9E03049 or 9E03049R)
| 9E03038 | NewOctave Global Damper Wire Regulator 45 angle |
|---|
 |
$8.99 |
|---|
| 9E03039 | NewOctave Global Damper Wire Regulator Straight |
|---|
 |
$8.99 |
|---|
| 9E03040 | NewOctave Global Damper Wire Regulator 90 angle |
|---|
 |
$8.99 |
|---|
| 9E03041 | GRAND DROP SCREW REGULATOR 5" SHAFT |
|---|
 |
$8.99 |
|---|
| 9E03042 | GRAND DROP SCREW REGULATOR 9" SHAFT |
|---|
|
$8.99 |
|---|
| 9E03043 | BACK CHECK & BRIDLE WIRE REGULATOR |
|---|
 |
$8.99 |
|---|
| 9E03044 | OFFSET KEY SPACER |
|---|
 |
$9.99 |
|---|
| 9E03045 | SPOON BENDERS 5 1/2" LONG FOR UPRIGHTS |
|---|
 |
$9.99 |
|---|
| 9E03046 | SPOON BENDERS 101/2" LONG FOR SPINETS |
|---|
 |
$11.99 |
|---|
| 9E03047 | HAMMER VOICING TOOL & FELT PICKER |
|---|
 |
$18.99 |
|---|
| 9E03048 | REGULATING TOOLS KIT |
|---|
 |
$87.99 |
|---|
| Set includes 8 Regulating Tools w/ Combination Handle: Action Flange Screwdriver, 5" Regulating Screwdriver, 90ยบ & Straight Damper Regulators, Offset Key Spacer, Grand Drop Screw Regulator, Bent Backcheck & Bridle Wire Regulator, Spoon Bender and Combination Tool Handle, packed in a fleece-lined pouch, as shown. All NewOctave GlobalTM tools come with an unlimited, lifetime replacement guarantee. |
| 9E03077 | DELUXE REGULATING TOOLS KIT |
|---|
 |
$238.45 |
|---|
| (Save 15% over buying these same tools individually) Each kit includes the following tools (25 in all, plus a space for the combination tool handle, included): 9E03011 - Jack Spring Hole Reamer 9E03012 - Punching Lifter 9E03018 - 8" Screw Holder 9E03031 - Flush-Cut Center Pin Cutters 9E03033 /33P - Chisel Tip & Phillips Tip Action Flange Screwdrivers 9E03034 - 8" Slotted Screwdriver Shaft, 1/4" Blade 9E03035K - Kimball Screwdriver Shaft 9E03036 - #2 Phillips Screwdriver Shaft, 5" x 3/8" 9E03037 - #2 Phillips Screwdriver Shaft, 8" x 1/4" 9E03038, 3039, 3040 - 45o, Straight and Right Angle Damper Regulators 9E03041 - 5" Grand Drop Screw Regulator 9E03043 - Bent Backcheck & Bridle Wire Regulator 9E03044 - Offset Key Spacer 9E03045 - 5" Spoon Bender 9E03047 - Hammer Voicing Tool 9E03049 - Combination Tool Handle 9E03055 - Hammer Shank Reducer 9E03056 - 5" Regulating Screwdriver 9E03060 - Universal Spring Adjusting Tool 9E03068 - Universal Capstan Regulator 9E03076 - Square Capstan Regulator 9E03097 - Spring-Loaded, Extra Long Needle Pliers 9E0713 - Key Bushing Tightener Kit shipping weight: 3Lbs. |
| 9E03056 | REGULATING SCREWDRIVER SHAFT - 5" |
|---|
| $9.99 |
|---|
| 9E03057 | REGULATING SCREWDRIVER SHAFT - 7" |
|---|
| $9.99 |
|---|
| 9E03058 | REGULATING SCREWDRIVER SHAFT - 12" |
|---|
| $9.99 |
|---|
| 9E03060 | UNIVERSAL SPRING ADJUSTING TOOL |
|---|
 |
$10.99 |
|---|
| 9E0704 | REAMER |
|---|
| $4.99 |
|---|
| 9E0707 | KEY EASING PLIER |
|---|
 |
$44.99 |
|---|
