All decals referenced are rub-on decals. These are not varnish transfers.
Fallboard decals (item #'s 2000 -3999) are $38.00ea ("cash" price.)
*Soundboard decals do vary greatly in price. Please email or call us for current pricing.
"G" after the part # and dimension indicates gold lettering
"GB" after the part # and dimension indicates gold lettering w/ black outline
To order from our on-line catalogue (www.kspiano.com), enter the item # and name In the "comments section" of your shopping cart.
You may also place decal orders with us by calling 1-877-407-4266. Please email info@kspiano.com
If you have any questions or need further information. We will be happy to assist you.
Please note that as rub-on decals do have a shelf life,
These must be custom made to order and will take approximately a week to 10 days to come in. For best results, apply your new
decal within 30 days of
Receipt.
D E C A L A P P L I C A T I O N I N S T R U C T I O N S
1. Apply to clean, dry sealer, lacquer or shellac. Do not sand finish
Because it creates a fine layer of dust which will impair adhesion.
2. Remove the backing paper and save for step #7.
3. Place decal in desired spot. Check alignment with ruler and tape
Down corners - being careful not to put pressure on the decal with fingers.
4. Rub off decal with a flat broad end-burnishing instrument. Burnish
Image with uniform pressure. Decal may appear hazy at first.
Pay attention not to miss small letters, characters or intricate detail.
5. Lift a corner and check to see if any portion remains on the carrier
Sheet; re-burnish any areas if uncertain.
6. Remove carrier sheet slowly (rubbing in front of lifted portion as you
Go). This is especially important with large soundboard decals.
7. Place backing sheet (saved from step #2 above) on top of the decal
And burnish again to insure maximum adhesion.
8. To protect the decal and bring up the image, we recommend spraying
Or brushing a very light finish over it. Clear varnish or lacquer usually
Works very well for this. Always allow any finish to dry thoroughly.
* A burnishing tool is available through our catalogue (part #4BT01)
To order from our on-line catalogue (www.kspiano.com),
click the "order now" button and at checkout enter the
item # and name In the "comments section" of your
shopping cart.
